0312-3427222 13730199092

How to deal with the failure of non-water absorption in Baoding slurry pump in Hebei Province

人气:1056 发表时间:2021-07-23

How to deal with the failure of Baoding slurry pump not absorbing water 1. The slurry pump does not absorb water during operation. This situation is usually caused by leakage of slurry pump suction pipe or instrument. Or it may be because the bottom valve of slurry pump is not opened. When encountering this kind of fault, technicians should first check where the leak is and stop it in time. Secondly, repair and replace the bottom valve of slurry pump. 2. There is abnormal sound, which means that there is no water supply fault. This situation is generally due to air infiltration in the water sucked by the slurry pump, which may cause abnormal sound of the pump body, and the impeller of the slurry pump is damaged or mixed with impurities, resulting in the pump not being able to inject water. When encountering such faults, technicians need to adjust the liquid level of slurry pump tank and check the impeller at the same time. If it is damaged or aged, it should be replaced in time. In addition, clean up the sundries in the pump body and impeller. ② The track of pump shaft and motor is not concentric. ③ bolts at the bottom of slurry pump are loose. The solutions are as follows: ① Adjust the outlet valve of slurry pump reasonably to make it run within the specified performance parameters. ② Correct the pump shaft and motor shaft of slurry pump to make them on the same center line. ③ Check whether the bolt of slurry pump foot is loose and tighten the bolt. Hebei Yingdike Pump Industry Group Co., Ltd. is a professional manufacturer of slurry pumps, submersible slurry pumps and sand suction pumps. It is a research and development in Hebei Province,Production in one enterprise.